Gray water tank, etc.

    Finally starting to feel just a tiny bit like a home in here....

    Finished the plumbing for the sink's drain. Used ABS and PVC for the s-trap. Braided pvc hose goes down into our gray water tank. PVC and ABS are yucky but there's not really any better options out there short of copper or galvy...and that's kinda crazy for our drain. Also, the sink came with ABS fittings and the gray tank has PVC fittings glued onto it so we just went with the path of least resistance there. At least it's not for drinking water.

    Here's our gray water tank all bolted into place! We were able to position it right under our sink for an easy drain. Used more scrap metal from Shnitzer Steel to make the cage. Bolted the box steel onto the ribs underneath the bus.

    We also built the skeleton for the bed. The whole structure (with the exception of the 2x2 ledges on the perimiter of the bed) is removable. This way if we need to take things in and out of the back door we can. We used some old plywood sliding doors from Julia's old closet for the platform.

    Our fresh water tank insulated with foil bubble wrap. We had a problem with condensation forming on the outside of the tank. Hoping that this solves that problem.

    More foil bubble wrap for the covered over windows. We figured out that the oven part of our stove operates with a direct vent system. This means that the reason there are 2 vents (one nested inside the other) is that the outer-most vent sucks combustable air into the appliance and the inner-most vent pushes combusted air out of the appliance. We can't just bend up some sheet metal around the outer-most vent and call it a day because it won't work....they 2 need to be separated on the way out and they need to terminate in such a way that they wont get involved with one another....hard to explain. Anyway, it's back to the drawing board with that. We are looking into ordering the parts for it right now. If it starts to look expensive, we are thinking of scrapping this thing altogether and pulling another stove out of the RVs they have at the pick n pull right now.

    Found a bunch of this gorgeous tile at Bring Recycling!!! They match our woodstove! We're going to use this to tile over the kitchen countertop. Still hoping to do a swirly broken-pieces mosaic over the heat walls around the woodstove.

    Also found these awesome pieces of junk at Bring. They are little archetechural thingies that I personally ripped off of a piece of rotting Victorian house that someone donated to Bring. Hoping to clean the up, refinish them and mount them somewhere in the corners of our bus...maybe making an archway in the hall? Not sure yet. I'm really excited about them though.

    In other news....we've decided to put the propane tanks in a sealed box underneath the bench/couch. It's making the most sense to us right now. (Thanks to Richard for his encouragement on this topic!) It'll be a way for us to really shorten our run from the tank to the appliances which is always a good thing - less pipe, fewer connections, fewer places to leak. It'll also be cheaper than buying a super-expensive under-mount tank. We found a couple used under-mounts from the 70's with no OPD valves...that looked kinda rusty...and decided that we'd be better safe than sorry on this one. Pretty sure that's what we're going to start working on tomorrow. =)Source URL:
    Visit Future Design Interior for daily updated images of art collection